Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Air Duct Cleaning in Grapevine, TX
HVAC cleaning in Grapevine typically runs $350-$650 for a complete system, while air quality and sanitizing services range from $200-$500 depending on whether mold treatment or UV light installation is needed. We’re CleanRun Duct Repair & Cleaning, and we dispatch crews to Grapevine from our Dallas-Fort Worth office. Every job starts with a written price before work begins, and every duct run is photographed before and after. Call (817) 520-8797 for a free estimate.
Why Grapevine Homes Are Different
Grapevine sits in a unique spot. It’s the only Metroplex city that shares a direct border with DFW International Airport, and that proximity matters inside your ducts. Residential systems near the airport’s eastern perimeter pull in ultra-fine jet-exhaust particulates and JP-8 combustion byproducts at concentrations Southlake and Colleyville simply don’t see. The dense hotel and convention corridor along Grapevine Mills Parkway recirculates high-volume guest air, adding to the load.
The housing stock tells another story. Most homes in ZIP 76051 went up during the 1980s and 1990s suburban boom along Denton Tap Road and Timberline Drive. Their original flexible duct systems are now 30-40 years old, prone to liner collapse, joint separation, and microbial growth. Older properties near the Historic District may have rigid ductwork with decades of undisturbed debris.
Climate compounds this. Grapevine’s position between DFW’s tarmac heat island and Grapevine Lake creates humidity spikes in spring and fall that accelerate mold colonization. North Texas cedar, elm, and oak pollen seasons pack return-air filters faster than in drier, less treed suburbs.
Our Main Grapevine Services
Most Grapevine homeowners who call us need one of these three services:
Air Duct Cleaning in Grapevine
We clean the full duct network, from return plenum (the sheet-metal box that collects air before it reaches the furnace) to each supply register. In Grapevine, we regularly find the gray-black carbon film our crews call the “airport signature” in homes east of Ira E Woods Avenue. Every run gets photographed before and after. Air Duct Cleaning in Grapevine covers the full scope.

Dryer Vent Cleaning in Grapevine
Lint accumulation in dryer exhaust ducts is a leading cause of house fires. We use negative-pressure extraction (suction that pulls debris out rather than pushing it deeper) to clear the full run from appliance to exterior termination. Grapevine’s mature tree canopy along corridors like Timberline Drive means more exterior lint traps clogged with pollen and leaf debris. Dryer Vent Cleaning in Grapevine includes a written before-and-after report.

Duct Repair & Sealing in Grapevine
Original flexible duct from the 1980s and 1990s develops leaks at joints and collapsed sections that bleed conditioned air into attics. We repair or replace damaged runs and seal joints with mastic (a thick, permanent sealant) rather than tape that degrades. Every repair is photographed and priced in writing before we start. Duct Repair & Sealing in Grapevine covers our full repair protocol.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterHVAC Cleaning in Grapevine

HVAC cleaning in Grapevine addresses what the local environment does to your system. The airport particulate load, lake-effect humidity, and aging flexible ductwork in 76051 combine to coat evaporator coils and blower assemblies with a sticky, microbial-friendly film that standard filter changes won’t touch. HVAC Cleaning from CleanRun means documented photo evidence of every component we clean.
Evaporator Coil Cleaning
Signs you need it
Ice forming on the coil, weak airflow from registers, or musty odors when the AC cycles on in Grapevine’s humid spring months.
What it costs in Grapevine
Evaporator coil cleaning typically runs $180-$320 in Grapevine, depending on accessibility and contamination level.
How we do it
We access the coil through the plenum, apply foaming cleaner, rinse with low-pressure water, and photograph the before and after condition for your job record.
Blower Cleaning
Signs you need it
Vibration or noise from the air handler, uneven heating or cooling between rooms, or dust puffing from registers when the fan starts.
What it costs in Grapevine
Blower assembly cleaning in Grapevine generally ranges $150-$280.
How we do it
We remove the blower wheel and housing, clean each blade and the motor cavity with compressed air and solvent, balance the assembly, and document with photos.
What HVAC Cleaning Costs in Grapevine
| Item | Typical range in Grapevine |
|---|---|
| Evaporator coil cleaning | $180-$320 |
| Blower assembly cleaning | $150-$280 |
| Full HVAC system cleaning (coil, blower, condenser, air handler) | $350-$650 |
How do I know my HVAC system needs cleaning, not just my ducts?
If your ducts are clean but rooms still heat unevenly, the evaporator coil or blower is likely coated with debris. We inspect both components with a borescope camera during every duct evaluation in Grapevine and show you what we find before quoting.
Can HVAC cleaning reduce my energy bills in Grapevine?
A coated evaporator coil or dirty blower can increase energy use by 15-25% because the system runs longer to reach temperature. After cleaning, we measure airflow improvement and include the readings in your documented photo record.
Air Quality & Sanitizing in Grapevine

Air quality and sanitizing in Grapevine targets what standard cleaning leaves behind. The airport particulate load and lake-effect humidity create conditions where microbial growth persists even after debris removal. Older flexible duct systems with porous liner surfaces in 76051 homes trap odors and spores that recirculate with every HVAC cycle. Air Quality & Sanitizing addresses these problems with documented application of EPA-registered products and verifiable results.
Mold Treatment
Signs you need it
Visible mold around registers, persistent musty smell when the system runs, or recent water intrusion in attics or crawl spaces near Grapevine Lake.
What it costs in Grapevine
Mold treatment for duct systems in Grapevine typically ranges $400-$800 depending on affected linear footage and accessibility.
How we do it
We apply an EPA-registered antimicrobial fog to all interior duct surfaces, allow proper dwell time, and verify with post-treatment photos showing treated surfaces.
UV Light Installation
Signs you need it
Recurring microbial growth after cleaning, family members with allergy symptoms that spike when the HVAC runs, or systems in humid zones near the lake.
What it costs in Grapevine
UV-C light installation in Grapevine generally runs $300-$600 for a properly sized unit with mounting and electrical connection.
How we do it
We mount a UV-C lamp in the supply plenum where it irradiates passing air and coil surfaces, wire it to the blower circuit, and include bulb replacement scheduling in your job record.
What Air Quality & Sanitizing Costs in Grapevine
| Item | Typical range in Grapevine |
|---|---|
| Mold treatment (duct system) | $400-$800 |
| UV-C light installation | $300-$600 |
| Full air quality package (treatment + UV + purifier) | $700-$1,200 |
Is mold treatment safe for my family and pets?
We use EPA-registered products applied with the HVAC system isolated, then ventilate before restart. The product breaks down to inert compounds and is documented in your written job record with Safety Data Sheet reference.
How long does UV light installation take?
Most residential UV installations in Grapevine take 2-3 hours including mounting, electrical connection, and testing. We photograph the installed unit and show you the operation indicator before we leave.
Brands We Service in Grapevine
We stock parts and service equipment from Honeywell, Aprilaire, and Guardsman, with Rotobrush and Nikro cleaning systems on every truck. Most common components for Grapevine’s installed base are available same-day. See our brands for the full roster.
Pricing for Air Duct Cleaning in Grapevine, TX

| Service | Typical range in Grapevine |
|---|---|
| Air duct cleaning (whole system) | $300-$550 |
| Dryer vent cleaning | $120-$200 |
| Duct repair (per run) | $200-$450 |
| Duct sealing (whole system) | $400-$900 |
| Evaporator coil cleaning | $180-$320 |
| Blower assembly cleaning | $150-$280 |
| Full HVAC system cleaning | $350-$650 |
| Mold treatment (duct system) | $400-$800 |
| UV-C light installation | $300-$600 |
| Full air quality package | $700-$1,200 |
Prices increase in Grapevine when systems have original flexible duct from the 1980s-1990s with limited access panels, or when multiple return plenums require separate cleaning. Every price is written and agreed before work starts, Haven Standard Clause 1, with no per-vent add-ons or post-arrival surprises.
Neighborhoods We Serve in Grapevine
We work across Grapevine’s full residential footprint, from newer construction near SH 114 TEXpress to established neighborhoods along North Industrial Boulevard. Crews are dispatched from our Dallas-Fort Worth office, and most Grapevine appointments are scheduled within a few business days.
- Timberline Estates
- Grapevine Lake area
- Historic District (near downtown)
- Silver Lake
- Stone Canyon
Service Area - Cities Near Grapevine

CleanRun crews serve Grapevine and surrounding communities regularly. We also schedule work in Southlake, TX, Colleyville, TX, Euless, TX, and Bedford, TX. The same written-price policy and documented photo record apply to every appointment.
Serving Grapevine, TX - Our Local Coverage Area
We’re based in the Grapevine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Air Duct Cleaning in Grapevine

Standard residential duct cleaning does not require a permit in Grapevine. Duct repair or replacement that modifies the HVAC structure may need inspection through the city’s building department. We handle permit documentation on any job where it’s required and include the status in your written scope.
Most Grapevine homeowners receive an appointment within 3-5 business days. We do not maintain a waiting list or urgency-based scheduling system. When you call (817) 520-8797, we offer the next available slot that works for your calendar.
Many Grapevine homes from the 1980s and 1990s have duct runs in attics above insulated ceilings. We need safe access to these spaces to photograph and clean the full system. We carry protective sheeting and will show you exactly which access points we need before starting.
What happens when you call
- 1A real person answersNo phone trees - talk to a local air duct cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Grapevine Customers Say
"Flat price agreed up front, no per-vent add-ons at the end. That was the whole reason I did not call the coupon company."
- Suzanne B."They found a disconnected duct in the crawl space that had been dumping conditioned air under the house for years. Photographed it, quoted the repair, fixed it."
- Devon A."The dryer vent was almost completely blocked with lint. They showed me the photograph and I understood immediately why the dryer had been running twice."
- Lucia M.




Before
After
Before
After