Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterWhy Fort Worth Homeowners Choose Carrier Air Duct Cleaning
CleanRun provides independent Carrier repair in Fort Worth air duct cleaning service with written upfront pricing and a documented photo record of every duct run. Our crew has worked on Carrier Infinity, Performance, and Comfort systems across Fort Worth since 2013, so we know the specific cabinet bypass and flex-duct failure patterns these units develop in local attics. We’re not affiliated with or authorized by Carrier - we’re an independent shop that diagnoses based on what your system’s footage shows, not a manufacturer script. Call (817) 520-8797 for a free estimate with a written price before any work starts.
Why Trust CleanRun Air Duct Cleaning Fort Worth for Your Carrier Air Duct Cleaning?
Tomas Reyes, our owner, grew up in the Bronx and picked up his first trade skills at Bronx Community College before spending years learning what actually accumulates inside residential duct systems when nobody’s looking. He and our crew have been running Haltom City Carrier service and jobs across Fort Worth for years, including plenty of work in the Near Southside where older homes hold onto decades of debris in ways newer builds don’t. The camera doesn’t have a sales pitch - if the footage doesn’t show a problem, we’ll tell you that too.
We know Carrier’s residential lineup well enough to spot the difference between a refrigerant issue and a duct issue, which matters because the symptoms look identical from the thermostat. Infinity series air handlers with ECM blower motors, Performance series cased coils, Comfort series paired with Legacy condensers - we’ve cleaned and sealed all of them in Fort Worth attics that routinely hit 140°F-plus in summer. We use OEM Carrier filter cabinets, door gaskets, and coil access panels when exact fit matters, and quality aftermarket flex duct, mastic, and insulation for the ductwork itself. Every job follows the H.A.V.E.N. Standard: background-checked, uniformed technicians identified by name before arrival, license number published, and a 365-Day Done Right Promise backed in writing. We also offer Air Duct Cleaning services for all major brands.
Common Carrier Air Duct Cleaning Problems We Fix in Fort Worth
- Infinity ECM blower motors shedding debris into the return plenum. Carrier Infinity air handlers use variable-speed ECM blower motors that run longer cycles at lower RPM. When the filter rack is poorly sealed - a factory issue on some early Greenspeed units - lint and dust bypass the filter and coat the blower wheel. The motor keeps running, but airflow drops 15-30% before you feel it at the register. We see this constantly in Fort Worth’s northside subdivisions where fine Blackland Prairie dust loads are already high.
- Performance and Comfort cased coils with dust-matted evaporator fins. Carrier’s factory filter cabinets on Performance and Comfort systems often let bypass air around the filter, especially after years of heat cycling in Fort Worth attics. The evaporator fins mat with dust, reducing capacity and raising static pressure until the system runs longer, costs more, and still leaves rooms uneven. Our video inspection catches this before we quote - you’ll see the matting yourself on the footage.
- Flex duct kinks and collapses at tight attic turns. Flex duct runs off Carrier air handlers in Fort Worth attics frequently kink or crush where installers took tight corners to save material. The upstairs runs 6 degrees warmer, owners call for refrigerant, and the real problem is a collapsed return flex choking airflow. We were called to exactly this scenario on a Carrier Infinity system - crushed return flex at a tight turn, plus a coil matted from a leaking filter cabinet. After cleaning the coil and blower, replacing the crushed flex run, and sealing the cabinet with mastic, the temperature split dropped to under 2 degrees.
- Return duct chases pulling attic debris through failed mastic joints. In older Fort Worth homes around Polytechnic Heights and the historic North Side near the Stockyards, Carrier platform air handlers often sit on return chases with mastic joints that cracked years ago. The system pulls insulation fibers, rodent droppings, and decades of Cross Timbers dust straight to the blower. This failure mode is far more common in Fort Worth’s older eastside and northside stock than in redeveloped inner Dallas neighborhoods.
- Legacy 24ACC / 24ABC condenser paired air handlers with degraded duct board. Carrier Legacy-series condensers, common in 1990s-2000s Fort Worth builds, were often paired with duct-board plenums that degrade faster in our 150°F attics. The board seams open, the fiberglass liner sheds, and the system distributes particles instead of clean air. We document this with before-and-after photos of every duct run - part of our standard deliverable since 2013.
BeforeAfterCarrier Parts & Our Repair-vs-Replace Approach
We stock OEM Carrier filter cabinets, door gaskets, and coil access panels for exact-fit replacement on Infinity and Performance systems. For the ductwork itself - flex runs, mastic, insulation - we use quality aftermarket materials from Abatement Technologies and Nikro that meet or exceed OEM specifications for airflow and fire rating.
Sometimes cleaning and sealing buys you five more years. Sometimes the air handler is rusted through or the coil is failing, and replacement makes more financial sense. We’ll show you the footage, put both numbers in writing under Haven Standard Clause 1, and let you decide. No pressure. Call (817) 520-8797 for a free second opinion on any written estimate you’ve already received.
Our Carrier Service Process - Step by Step
- 1
Diagnosis with video inspection. We feed a camera through every accessible duct run on your Carrier system, starting at the air handler. You’re looking at the same footage we are - plenum condition, coil fin matting, blower wheel buildup, flex duct integrity. We note the model and serial number to confirm parts compatibility.
- 2
Written scope and price. Before any panel comes off, you get a written price for the full system cleaning, any duct sealing needed, and parts replacement if applicable. One flat price per system. No per-vent pricing, no add-ons after we start.
- 3
Cleaning and repair. We use Rotobrush and Nikro negative-pressure extraction equipment to clean duct runs, registers, and the return chase. Coil and blower cleaning follows, with OEM gaskets replaced if the filter cabinet is leaking. Crushed flex duct gets replaced, not patched. Mastic seals every joint we disturb.
- 4
Testing and documentation. We measure static pressure before and after, run the system through a full cycle, and deliver your documented photo record - every duct run, before and after, plus the written scope and 365-Day Done Right Promise.
Carrier Products We Service & Install in Fort Worth
We service and clean Carrier Air Duct Cleaning in Lake Worth, TX including Infinity series with Greenspeed variable-speed systems, Carrier Performance series, Carrier Comfort series, and Legacy 24ACC / 24ABC condensers paired with Carrier air handlers. We stock OEM filter cabinets and gaskets for Infinity and Performance models locally, plus aftermarket flex duct and mastic for the ductwork repairs these systems commonly need in Fort Worth attics. If you’re choosing between brands, we also work on Lennox and Trane systems - our crew is multi-brand trained, not single-brand dependent.
We Also Service These Brands
CleanRun’s technicians are trained across major residential HVAC brands. We regularly service Lennox Signature Collection and Elite series, Trane XV and XR lines, and most other residential air handlers and duct systems found in Fort Worth homes. Our equipment roster - Rotobrush, Nikro, Abatement Technologies, Honeywell, Aprilaire, and Guardsman - handles whatever brand is installed.
FAQs - Carrier Air Duct Cleaning Service in Fort Worth
No. We’re an independent Carrier service provider, not affiliated with or authorized by Carrier Corporation. We diagnose and clean based on what your system’s footage shows, not a manufacturer script. Our independence means we can recommend repair vs. replacement based on your home’s actual condition, not a brand-mandated protocol.
We use OEM Carrier filter cabinets, door gaskets, and coil access panels when exact fit matters for warranty-safe reassembly. For ductwork - flex runs, mastic, insulation - we use quality aftermarket materials that meet or exceed OEM specifications. We’ll tell you which category each needed part falls into before you approve the work.
A full system cleaning on a typical Fort Worth home with a Carrier air handler takes 3-5 hours, depending on duct run count and whether we find crushed flex or failed mastic that needs repair. We don’t rush - the photo record gets taken, every joint gets sealed, and the system gets cycled before we leave. Call (817) 520-8797 to schedule; we’ll give you a time window, not a vague “sometime morning.”
We service Carrier Infinity series including Greenspeed variable-speed systems, Carrier Performance series, Carrier Comfort series, and Legacy 24ACC / 24ABC condensers with matched air handlers. If your model isn’t on this list, call us with the model number - we’ve likely seen it in a Fort Worth attic already.
No, if the work is done properly. Carrier’s warranty covers defects in materials and workmanship, not maintenance. We use OEM access panels and gaskets for reassembly, document the work with photos, and don’t modify control boards or refrigerant circuits. Our cleaning method - negative-pressure extraction with mechanical agitation - is the industry standard and doesn’t touch covered components in ways that would void protection.
Most likely the evaporator coil is matted with dust and moisture is collecting in the fin pack, creating microbial growth. Carrier Performance filter cabinets often develop bypass leaks over years of heat cycling in Fort Worth attics, letting unfiltered air hit the coil. We verify this with video inspection - you’ll see the matting yourself - then clean the coil and seal the cabinet. If the duct board or flex duct has absorbed odor, we address that too. Call (817) 520-8797 and we’ll put a written price to the fix.
Every 3-5 years, sooner if you notice uneven temperatures or higher bills. Fort Worth’s 140-150°F attic temperatures degrade flex-duct plastic liners and connection tapes faster than milder markets. The 1990s-2000s production builds around Alliance and north Tarrant County are hitting the 20-30 year mark now, which is when we see the most failures. A video inspection shows the condition without guessing.
Yes, and we often find they need it most. The return side pulls air from your home - and any leaks in the chase pull attic debris too. We clean the return ductwork, seal the filter rack to the cabinet with mastic if it’s leaking, and replace degraded gaskets. The filter does its job only if the air actually passes through it.
Usually it’s a filtration problem caused by a duct or cabinet leak. The blower wheel shouldn’t see unfiltered air - if it does, the leak is upstream, either at the filter rack or in the return chase. We clean the wheel, but we also find and seal the leak that caused it. Otherwise you’re cleaning the symptom every two years instead of fixing the path once.
A full system cleaning for a typical Fort Worth home with a Carrier air handler runs $450-$750, depending on duct run count, accessibility, and whether we find crushed flex or failed mastic that needs repair. Coil and blower cleaning adds $180-$280 if needed. We deliver one flat price per system in writing before any work starts - no per-vent pricing, no add-ons. Call (817) 520-8797 for an exact quote; estimates are free.
Book Your Carrier Service in Fort Worth, TX
Call (817) 520-8797 to schedule your Carrier system cleaning. You’ll speak to a live person, get a technician identified by name before arrival, and receive a written price before any panel comes off. Every job includes a documented photo record of every duct run and our 365-Day Done Right Promise in writing. Free second opinions on any written estimate.
Written by Tomas Reyes, Owner at CleanRun Duct Repair & Cleaning, serving Fort Worth since 2013.