Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterNikro Duct Repair & Sealing in Fort Worth: What to Know First
CleanRun Air Duct Cleaning Fort Worth provides independent Nikro duct repair and sealing across Fort Worth, with most jobs completed in a single visit and a written price delivered before any work begins. We are not affiliated with or authorized by Nikro. Typical turnaround from diagnosis to sealed system runs two to four hours for residential jobs, depending on access and the extent of leakage. Our pricing follows Haven Standard Clause 1: one flat price per system, agreed in writing, with no per-vent add-ons or post-arrival surprises. This page is for Nikro owners in Fort Worth who want to know what actually fails, what it costs, and how to verify the work was done right. Call (817) 520-8797 for a free estimate.
How Nikro Products Fail - and How We Fix Them
- PD Series portable air scrubber duct connections. The flexible intake collar on PDH-55 and PDS-20 units hardens after two to three summers in Fort Worth’s attic heat, cracking at the clamp line. We replace with reinforced silicone collars rated for 180°F continuous service and re-secure with stainless worm-gear clamps, not the original spring clamps that lose tension.
- SL-2000 series HEPA vacuum hose barb fittings. The molded plastic barb on SL-2000E units fatigues at the plenum junction from repeated negative-pressure cycling. Our crew cuts back to sound duct, installs a metal transition sleeve, and seals with mastic rated for negative-pressure systems. The camera doesn’t have a sales pitch - we photograph the crack propagation before touching anything.
- Flex duct downstream of Nikro air movers. The high static pressure from Nikro’s 2-horsepower blowers separates inner liners from wire helix in flex runs longer than 15 feet, common in Fort Worth’s 1980s-2000s ranch builds. We sleeve the damaged section with new flex, triple-strap at both ends, and balance static with a manometer reading.
- UV-2000 series mounting collar seal degradation. The rubber gasket between UV lamp housing and sheet metal duct turns brittle in Texas heat, pulling air from unconditioned spaces. We source EPDM replacement gaskets or machine custom collars from 26-gauge galvanized when OEM lead times stretch past two weeks.
- Portable unit caster frame stress cracks. The welded steel frame on older Nikro portables transmits vibration into attached rigid duct, fatiguing seams at the plenum. We isolate with vibration-dampening hangers and re-seal with fiberglass-reinforced mastic, documenting the crack pattern in the photo record.
Our Nikro Duct Repair & Sealing Process
- 1
Visual and camera inspection. We run a borescope through every accessible duct run, recording footage of seams, collars, and flex connections. You see what we see before any price is discussed.
- 2
Static pressure and leakage test. We pressurize the system and measure actual leakage in CFM at 25 Pascals, per SMACNA guidelines. This number determines whether repair or replacement is the honest recommendation.
- 3
Written scope and price. Haven Standard Clause 1: one flat price for the agreed work, delivered in writing. No “call for a quote” - the quote is in your hand before we unrack a tool.
- 4
Parts selection. OEM Nikro gaskets and collars when available; quality aftermarket when lead times or cost make OEM impractical. We note the source on your written scope.
- 5
Repair and seal. Mastic application, mechanical fastening, and sleeve installation per manufacturer torque specs. Every seam is accessible for future inspection.
- 6
Post-repair verification. Second pressure test, photo record of completed work, and delivery of your documented job file including before images, after images, and the 365-Day Done Right Promise in writing.
BeforeAfterWhat Nikro Duct Repair & Sealing Costs in Fort Worth
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Single flex duct section repair (Nikro-connected) | $340-$520 | Length, attic access, insulation replacement |
| Metal duct seam sealing (mastic + mesh) | $280-$440 | Linear feet, number of branches, accessibility |
| Collar/gasket replacement (Nikro-specific) | $180-$320 | OEM vs. aftermarket part, location in system |
| Full plenum reseal with pressure test | $580-$890 | Plenum size, number of takeoffs, remediation of prior tape-only work |
Fort Worth’s clay soil and seasonal foundation movement stress ductwork differently than Gulf Coast markets - we see more separated collar joints in homes west of I-35W, where slab shift is pronounced. Every estimate is free, and we offer a Free Second Opinion on any competitor’s written estimate. Call (817) 520-8797.
Why Fort Worth Homeowners Call CleanRun Air Duct Cleaning Fort Worth for Nikro Work
We’ve been running jobs across Fort Worth since 2013, including plenty of work in the Near Southside where older homes hold onto decades of debris and duct degradation that newer builds simply don’t. Tomas Reyes and our crew know Nikro equipment from field hours, not catalog browsing - we can tell you whether a PDH-55 collar crack is cosmetic or critical before the ladder comes down. Our 365-Day Done Right Promise is backed in writing on every job, not stated in marketing copy and forgotten. Technicians operate under Haven Standard Clause 3: Verified Crews - background-checked, uniformed, identified by name before arrival. We also service Lennox, Trane, and Carrier systems, which matters when your Nikro equipment is integrated into a mixed-manufacturer setup that requires cross-brand knowledge to seal properly. Every job concludes with a Documented Photo Record of every duct run, included as standard. You don’t take our word for it; you take the files.
FAQs
No - independent duct repair and sealing does not void Nikro’s equipment warranty, provided the work does not modify electrical or motor components. As an independent Nikro service provider, we document exactly what was touched and what was not, so warranty claims on unaffected components remain straightforward. Call (817) 520-8797 if you need clarification on your specific unit.
We list the manufacturer and part number of every component on your written scope. If we substitute quality aftermarket due to availability, we note the source and equivalent specification. The photo record includes close-ups of installed parts. Haven Standard Clause 1 requires this transparency.
Replace when leakage exceeds 15% of total airflow or when flex duct shows liner collapse in more than 30% of the run. Repair when leakage is localized to collars, seams, or single sections. Our pressure test gives the actual number; we don’t guess. Call (817) 520-8797 for a free estimate with test data included.
Most residential jobs finish in two to four hours. Larger homes in Fort Worth’s Mira Vista or Monticello areas with extensive attic duct networks may run a full day. We schedule accordingly and confirm the time frame in your written scope before starting.
Your delivered job file includes before-and-after photos of every duct run, the post-repair pressure test reading, and the written scope with technician signature. If the numbers or images don’t match what was promised, the 365-Day Done Right Promise applies. We have held this practice since our first job in 2013.
Written by Tomas Reyes, Owner, CleanRun Air Duct Cleaning Fort Worth at CleanRun Air Duct Cleaning Fort Worth, serving Fort Worth and nearby areas.