Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterAir Duct Cleaning in Fort Worth, TX
HVAC cleaning in Fort Worth typically runs $350-$650 for a complete system, with most jobs scheduled within a week and finished in one day. Fort Worth’s twin-era housing stock - aging brick ranches in Wedgwood and Ridglea Hills alongside rushed flex-duct subdivisions in Alliance and north Tarrant County - creates duct problems Dallas doesn’t see clustered the same way. Call (817) 520-8797 for a written estimate before any work starts.
CleanRun crews serve Fort Worth from our Dallas-Fort Worth office, carrying Rotobrush and Abatement Technologies equipment into attics that hit 140-150°F through July and August. Every job opens with a written price and closes with a Documented Photo Record of every duct run, before and after.
Why Fort Worth Homes Are Different
Fort Worth sits at the eastern edge of the Cross Timbers, where calcareous and sandy soils west of the city produce finer, grittier dust than the black clay of Dallas County. That particulate loads heavily into return systems through any gap. In Polytechnic Heights and the historic North Side near the Stockyards, we regularly find 1940s-60s homes where original cloth-backed duct tape on galvanized joints has turned to powder, leaving open seams pumping conditioned air straight into attic space. The failure mode is specific to Fort Worth’s older eastside and northside stock.
The north Fort Worth growth corridors - Alliance, Saginaw, Haslet - present the opposite problem: 1990s-2010s production homes with flex-duct systems rushed to completion, now sagging and partially crushed after 20-plus years in those same baking attics. Dallas’s older housing is denser and its newer growth spread more gradually, so neither problem clusters the same way there.
Our Main Fort Worth Services
These are the three services Fort Worth homeowners call about most. Each has its own page with deeper detail on sub-jobs and local pricing.
Air Duct Cleaning in Fort Worth
Full-system negative-pressure extraction for supply and return ductwork, register to plenum. In Fort Worth’s postwar ranch neighborhoods, we often find decades of Cross Timbers dust compacted at elbows and transitions; in Alliance-area flex-duct homes, we see debris accumulation where sags have created low points. Every run is photographed before and after. Air Duct Cleaning in Fort Worth
Dryer Vent Cleaning in Fort Worth
Lint removal from dryer exhaust ducting to exterior termination, with airflow test before and after. Fort Worth’s wind-borne particulate and older vent routing through hot attics increases fire risk in homes from Ridglea to Como. We verify clear path and proper termination type per local code. Dryer Vent Cleaning in Fort Worth
Duct Repair & Sealing in Fort Worth
Sheet-metal restoration, flex-duct replacement, and Aeroseal or mastic sealing of leakage points. The disintegrated tape failures we find in Poly and the Near Southside, plus the crushed flex in north Tarrant subdivisions, both require repair before cleaning delivers lasting results. Duct Repair & Sealing in Fort Worth
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterHVAC Cleaning in Fort Worth
HVAC cleaning in Fort Worth means addressing components that have been operating in attics exceeding 140°F for years, often with degraded filtration and duct leakage pulling in unfiltered attic air. The evaporator coils in Alliance-area systems frequently carry a biofilm layer from condensate pans that never fully drain in summer humidity, while blower assemblies in Wedgwood’s older homes accumulate compound dust loads from decades of leaky returns. HVAC Cleaning from CleanRun includes every component in the air path, photographed before and after.
Evaporator Coil Cleaning
Signs you need it
Ice formation on refrigerant lines, weak airflow from registers, or a musty smell when the AC cycles on in Fort Worth’s humid July afternoons.
What it costs in Fort Worth
Evaporator coil cleaning typically runs $180-$320 in Fort Worth, with access difficulty in tight attic spaces at the higher end.
How we do it
We remove the coil assembly when possible, apply foaming cleaner formulated for aluminum fins, rinse with low-pressure water, and photograph the fin surface before reassembly.
Blower Cleaning
Signs you need it
Dust puffing from registers at startup, uneven heating or cooling across rooms, or a blower motor running hotter than spec.
What it costs in Fort Worth
Blower cleaning and balancing runs $150-$280 in Fort Worth, with multi-speed variable blowers at the upper end.
How we do it
We remove the blower assembly, clean the squirrel cage and housing with compressed air and solvent, lubricate bearings per manufacturer spec, and verify amp draw against the nameplate.
What HVAC Cleaning Costs in Fort Worth
| Item | Typical range in Fort Worth |
|---|---|
| Evaporator coil cleaning | $180-$320 |
| Blower cleaning | $150-$280 |
| Condenser cleaning | $120-$220 |
How do I know the HVAC cleaning was actually done?
CleanRun’s Documented Photo Record shows every component before and after - the coil fins, the blower cage, the condenser fins - delivered as part of your standard job record, not as an extra. Call (817) 520-8797 to schedule.
Why does my Fort Worth home need HVAC cleaning more often than my parents’ house in Ohio?
Fort Worth’s 140-150°F attics, wind-borne Cross Timbers dust, and flex-duct systems prone to leakage create a harder environment than milder, more humid climates with tighter ductwork. The loading is simply higher here.
Air Quality & Sanitizing in Fort Worth
Air quality work in Fort Worth addresses what grows in systems that cycle between extreme attic heat and conditioned cool: mold in condensate pans and porous duct-board seams, bacteria in biofilm on coils, and the persistent musty odor that returns within days of standard cleaning alone. The rapid-build flex-duct homes of north Tarrant County are particularly prone to these issues because their plastic liners and tape-sealed connections degrade faster in heat, creating moisture traps and air leaks that standard filtration cannot reach. Air Quality & Sanitizing from CleanRun treats the source, not the symptom.
Mold Treatment
Signs you need it
Visible black or green growth on registers or in the plenum, a musty smell that intensifies when the system runs, or recent water intrusion in the duct path.
What it costs in Fort Worth
Whole-system mold treatment runs $400-$750 in Fort Worth, with extent of growth and accessibility determining placement in that range.
How we do it
We apply EPA-registered antimicrobial through the full duct network using a fogging system, treat the coil and pan with specific cleaner for biofilm, and photograph all treated surfaces for the job record.
UV Light Installation
Signs you need it
Recurring mold or biofilm after cleaning, allergy symptoms that spike when the system runs, or a home in a shaded lot with limited natural UV exposure.
What it costs in Fort Worth
UV-C lamp installation near the coil typically costs $350-$600 in Fort Worth, including the lamp, mounting hardware, and electrical connection.
How we do it
We mount a Guardsman UV-C lamp with sight glass in the supply plenum upstream of the coil, wire to the blower circuit for automatic operation, and show the customer the installation point in the photo record.
What Air Quality & Sanitizing Costs in Fort Worth
| Item | Typical range in Fort Worth |
|---|---|
| Mold treatment (whole system) | $400-$750 |
| UV light installation | $350-$600 |
| Bacteria sanitizing | $250-$450 |
Will sanitizing chemicals leave residue in my ducts?
CleanRun uses EPA-registered products formulated for HVAC application at manufacturer-specified dilution; the fogging process leaves no measurable residue on metal or flex-duct surfaces, verified by our post-treatment photo inspection. Call (817) 520-8797 for specifics on the product we use for your system type.
How long does UV light take to work?
UV-C lamps begin reducing biofilm growth immediately, with noticeable odor improvement typically within 72 hours of installation as existing colonies are suppressed; lamp replacement is annual at approximately $85-$120.
Brands We Service in Fort Worth
CleanRun stocks parts and maintains factory training for Honeywell, Aprilaire, and Guardsman air quality components, with Rotobrush and Nikro extraction equipment on every Fort Worth truck. Most replacement parts arrive within 24 hours through our Dallas-Fort Worth supply chain. See our brands for the full roster.
Pricing for Air Duct Cleaning in Fort Worth, TX
| Service | Typical range in Fort Worth |
|---|---|
| Whole-system air duct cleaning | $350-$650 |
| Dryer vent cleaning | $120-$220 |
| Evaporator coil cleaning | $180-$320 |
| Blower cleaning | $150-$280 |
| Condenser cleaning | $120-$220 |
| Duct repair & sealing (per system) | $400-$900 |
| Mold treatment (whole system) | $400-$750 |
| UV light installation | $350-$600 |
| Bacteria sanitizing | $250-$450 |
| Odor removal treatment | $200-$400 |
Fort Worth jobs at the higher end usually involve limited attic access in older homes, extensive flex-duct replacement in north Tarrant subdivisions, or systems that haven’t been opened in 15-plus years. Every price is written and agreed before work starts, per Haven Standard Clause 1 - no exceptions, no add-ons after the van arrives.
Neighborhoods We Serve in Fort Worth
CleanRun schedules Fort Worth jobs with route density in mind, typically offering appointments within 3-5 business days across the city. Crews are dispatched from our Dallas-Fort Worth office with GPS routing optimized by neighborhood.
- Wedgwood
- Ridglea Hills
- Polytechnic Heights
- Alliance / north Tarrant corridor
- Near Southside
Service Area - Cities Near Fort Worth
Our crews cover the full Fort Worth metro and adjacent communities, including Haltom City, TX, North Richland Hills, TX, Bedford, TX, and Keller, TX. Scheduling is coordinated from our Dallas-Fort Worth office with route optimization to minimize transit time and keep appointment windows reliable.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Air Duct Cleaning in Fort Worth
Standard air duct cleaning and HVAC component cleaning do not require permits in Fort Worth. Duct replacement or modifications to the plenum may trigger a mechanical permit through the City of Fort Worth Development Services Department; CleanRun handles permit research and filing as part of any repair scope that requires it.
Most Fort Worth appointments are available within 3-5 business days, with some flexibility for urgent situations like post-renovation cleaning or real estate transactions. We do not promise same-day dispatch - duct cleaning is a scheduled, documented job, not an emergency service.
Few Fort Worth HOAs restrict indoor duct cleaning, though some master-planned communities in the Alliance and Keller corridors require 24-hour notice for any service vehicle entry. CleanRun notes HOA requirements when you schedule and coordinates access timing accordingly.
What happens when you call
- 1A real person answersNo phone trees - talk to a local air duct cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fort Worth Customers Say
"My allergies genuinely improved. They also told me the ducts did not need sealing, which I had been quoted for elsewhere."
- Petra K."Flat price agreed up front, no per-vent add-ons at the end. That was the whole reason I did not call the coupon company."
- Suzanne B."They found a disconnected duct in the crawl space that had been dumping conditioned air under the house for years. Photographed it, quoted the repair, fixed it."
- Devon A.