Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterTrane Air Duct Cleaning in Fort Worth, TX | CleanRun Air Duct Cleaning Fort Worth
Air Duct Cleaning - Fort Worth for Trane systems typically runs $380-$680 for a complete residential system, with most jobs scheduled within a week. What makes our Trane work here different is the twin-era housing stock: we clean cased coils choked by Cross Timbers dust in 1960s Ridglea ranches and re-strap crushed flex runs in 2000s Alliance subdivisions, often on the same day. We’re an independent Trane service provider, not a dealer, so we diagnose the full air path instead of stopping at the cabinet. Call (817) 520-8797 for a written estimate before any work starts.
Why Fort Worth Residents Choose Us for Trane Service
We’ve been working on Trane equipment in Fort Worth since 2013. Our crew knows the difference between an XR15 condenser paired with a 1990s sheet-metal trunk in Wedgwood and an XV20i variable-speed system fighting crushed flex in a Saginaw attic. That familiarity matters because Trane’s cabinet dimensions, coil placement, and blower geometry create specific airflow patterns that interact with whatever ductwork is attached.
Because we’re independent, we’re not limited to Trane’s parts catalog or warranty protocols. We stock OEM Trane contactors, blower motors, and coil assemblies for jobs that need them, and we source quality aftermarket flex duct, mastic, and foil tape from Guardsman and Abatement Technologies for everything else. Every quote is written and delivered before a panel comes off, under Haven Standard Clause 1. Every job ends with a Documented Photo Record of every duct run, before and after.
Tomas Reyes, our owner, grew up in the Bronx and learned his first trade skills at Bronx Community College. He’s been running jobs across Fort Worth for years, including plenty of work in the Near Southside where older homes hold debris in ways newer builds don’t. His habit is to pull the camera out before saying a word about scope or price. The camera doesn’t have a sales pitch. If the footage doesn’t show a problem, he’ll tell you that too.
Common Trane Air Duct Cleaning Problems We Solve in Fort Worth
- Cased coil matting on XR and XB attic air handlers. The fine calcareous dust blowing in off the Cross Timbers collects on Trane’s A-shaped cased coils, then bakes hard in 140-150°F Fort Worth attic air. We’ve pulled coils in Ridglea Hills homes where the mat was thick enough to block a flashlight beam. A proper chemical wash and fin comb restores airflow without replacing the coil.
- Separated flex-duct collars feeding Trane ceiling cans. In Alliance and Saginaw production builds from the 1990s-2000s, flex-duct runs sag under their own weight and pull free at the register collar. The Trane return plenum then pulls attic insulation fibers and Blackland Prairie grit straight onto the blower wheel. We re-strap with support straps every 4 feet and seal collars with mastic, not tape.
- Leaking sheet-metal joints on original trunks in postwar ranches. Wedgwood, Polytechnic Heights, and Como homes built 1950s-1970s often still have galvanized trunks with cloth-backed duct tape that turned to dust years ago. Conditioned air pumps straight into the attic, and the Trane system runs longer to hit setpoint. We seal with foil tape and water-based mastic, then pressure-test.
- High-static blower strain on XV18 and XV20i variable-speed systems. Trane’s variable-speed blowers are more sensitive to static pressure than single-stage units. In Fort Worth, partially crushed flex duct or a debris-choked coil pushes the blower into high-RPM, high-amperage operation. We measure static before and after cleaning; our field vignette below shows what a proper drop looks like.
- Duct-board seam failure in attic air handlers. Summer attic heat degrades the resin in duct-board seams faster here than in milder markets. On Trane package units and upflow air handlers in north Fort Worth, we find gaps at the plenum transition that pull unfiltered attic air into the supply stream. We re-seal with fiberglass-reinforced mastic and metal-backed tape.
BeforeAfterTrane Service in Fort Worth: What Local Conditions Mean for Your Equipment
Fort Worth’s two housing eras sit almost back-to-back across the metro in a pattern Dallas doesn’t replicate. On a typical Tuesday our crew can hit a taped-and-leaking 1962 galvanized system in Polytechnic Heights in the morning and a crushed 22-year-old flex run in an Alliance subdivision by afternoon. Dallas’s older stock is denser and its newer growth spread more gradually, so neither failure type clusters the way it does here.
This matters for Trane owners because the same model line behaves differently depending on which era it’s installed in. A Trane XR16 paired with an undersized 1960s sheet-metal trunk in Ridglea Hills runs at higher static pressure than the identical unit in a properly ducted 2015 build. An XV20i in a Saginaw attic with sagging flex duct will ramp its blower speed up and down constantly, logging excess runtime hours that show up in premature motor wear. We account for this in our cleaning scope: it’s never just “duct cleaning,” it’s matching the service to the specific interaction between that Trane unit and that Fort Worth home’s duct generation. Fort Worth service area coverage includes both eras, start to finish.
Trane Models & Products We Service in Fort Worth
We clean and service Trane XR and XB series split systems and air handlers, XR15, XR16, and XR17 condensing units, XV18 and XV20i variable-speed systems, and the 2- and 3-ton package units common on Fort Worth ranch homes. Our Trane sales & service page covers full system work; this page focuses on the air-path side.
For parts, we default to OEM Trane on anything touching refrigerant or control logic: contactors, blower motors, TXVs, and coil assemblies. For generic materials, we use aftermarket MERV filters, flex duct, mastic, and foil tape from Honeywell, Aprilaire, and Guardsman. This keeps turnaround fast without paying dealer markup for commodity items. We carry common Trane blower motors and coil assemblies on our Fort Worth trucks, so most clean-and-repair jobs finish in one visit.
Trane Service Pricing in Fort Worth
Whole-system Trane air duct cleaning in Fort Worth runs $380-$680 for a typical single-system home. What drives the cost:
- Number of duct runs and registers (more runs = more labor, more photo documentation)
- Accessibility of the air handler and plenum (tight attic vs. closet location)
- Whether evaporator coil cleaning is needed (adds $120-$180 on most XR/XB systems)
- Extent of flex-duct repair or re-strapping required
Every estimate is free, written, and delivered before work starts. No per-vent pricing, no coupon bait. The price we write is the price on the invoice. Call (817) 520-8797 for an exact quote on your Trane system.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Trane Air Duct Cleaning in Fort Worth
Yes. Extreme attic heat bakes debris onto Trane cased coils and hardens mastic seals, so we use stronger coil cleaning chemistry and longer dwell times than crews in milder markets. We also schedule attic-heavy jobs earlier in the day when possible, for crew safety and because heat-soaked duct board is harder to handle. Call (817) 520-8797 and we’ll note your attic access when booking.
No. Duct cleaning and air-path service don’t require dealer authorization. We’re an independent Trane service provider, not manufacturer-affiliated, which means we can work across model lines and mix OEM and quality aftermarket parts as the job requires. We carry OEM Trane components for repairs that need them, but we’re not bound to Trane’s pricing or warranty restrictions on maintenance work.
We measure static pressure and inspect with a borescope. If the crush is localized at a support point and the flex liner isn’t torn, re-strapping and collar sealing usually restores proper airflow. If the liner is split or the static drop after repair still exceeds 0.5 inches WC on a variable-speed XV system, we recommend replacement. We show you the borescope footage and the manometer reading before you decide.
The original sheet-metal trunk was sized for the airflow of whatever furnace was there in 1965, not for the higher static pressure of a modern Trane air handler. Add disintegrated cloth-backed tape at the joints, and you’re losing conditioned air into the attic while the blower works harder. We measure airflow at each register, seal the leaks, and tell you honestly whether the trunk needs modification or replacement to match your Trane unit’s design spec.
No. Routine duct cleaning and coil maintenance don’t affect Trane’s equipment warranty. We document our work with before-and-after photos of every run, which can actually support a warranty claim if debris-related damage is later found. We use manufacturer-compatible cleaning methods and avoid high-pressure washing on electronic components. Haven Standard Clause 1: written scope, written price, no surprises.
Service Areas Near Fort Worth
We run Trane service throughout Fort Worth and the immediate corridor, including Trane service in Haltom City, Trane service in Lake Worth, Saginaw, Richland Hills, and Watauga. Same crew, same equipment roster, same written pricing standard.
Book Your Trane Service in Fort Worth Today
Call (817) 520-8797 to schedule a free estimate. We’ll send a written price before any work starts, complete the job with a Documented Photo Record of every duct run, and back it with our 365-Day Done Right Promise. Tomas Reyes and the crew at CleanRun Fort Worth Dryer Vent Cleaning have been serving this market since 2013. Every job gets the same standard: show the footage, name the price, do the work, prove it happened.
Written by Tomas Reyes, Owner at CleanRun Air Duct Cleaning Fort Worth, serving Fort Worth since 2013.