Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Dryer Vent Cleaning Across Arlington
Dryer vent cleaning in Arlington typically runs $149-$289 for a standard single-family home, with full rerouting or bird-guard installation pushing toward the upper end. Most jobs are scheduled within a few business days, and every visit starts with a written price before any panel comes off.
We know Arlington’s housing stock. The city built out fast between 1965 and 1990, and most of those slab-on-grade ranches and split-levels are still running their original dryer vent flex duct through attics that hit 140°F for five months straight. That’s a specific failure pattern, not a generic maintenance issue. Our Dryer Vent Cleaning crews serve Arlington from our Dallas-Fort Worth dispatch office, and we’ve documented thousands of these original runs - crushed at elbows, sagging at low points, pulled loose by clay soil movement. If your dryer’s taking two cycles, the trap is not the problem. Call (817) 520-8797 and we’ll put a written number in front of you before we touch a tool.
Why CleanRun Air Duct Cleaning Fort Worth Is Arlington’s Preferred Dryer Vent Cleaning Company
We’ve been in Arlington homes since 2013. Not as a franchise operation - we’re independently owned and operated under the Haven Standard, with Tomas Reyes leading the company. Every technician is background-checked and uniformed under Haven Standard Clause 3: Verified Crews, and we identify them by name before they arrive.
Arlington customers get the same deliverable on every visit: a written price before work starts, a Documented Photo Record of every duct run before and after, and the 365-Day Done Right Promise in writing on the invoice. No manager-approval games. If it’s not right, we make it right.
Our equipment is professional-grade and named: Rotobrush agitation systems, Nikro negative-pressure extractors, and Guardsman vent hardware when rerouting is needed. You can look up every brand yourself before agreeing to the scope.
We also publish our license number on every page, not buried in a footer. State-licensed, insured and bonded. And if you have a competitor’s written estimate, we’ll put ours next to it for free - Haven Standard Clause 7: Free Second Opinion.
Our Dryer Vent Cleaning Services in Arlington
Dryer Vent Inspection
Every Arlington job starts here. We run a camera down the full length of the vent run - through the attic, behind the laundry wall, to the termination point - and photograph what we find. In Arlington’s 1965-1990 tract homes, we regularly see original 4-inch flex duct stapled up in attics that have cycled through 120°F-plus heat for decades. The material goes brittle. It sags between joists. It crushes at elbows where the original installer pulled it too tight around a corner.
The inspection delivers a Documented Photo Record showing the exact condition: lint accumulation depth, duct integrity, termination security, and whether the run meets current IRC exhaust length limits. You see what we see before any price is finalized.
Vent Cleaning / Lint Removal
We don’t blow shop-vac air through a vent and call it done. Our process uses Rotobrush agitation tools under Nikro negative-pressure extraction - the brush loosens packed lint while the vacuum pulls it out at the source, so debris doesn’t migrate into your laundry room or attic.
In Arlington, the lint we remove is often layered with attic insulation debris. That’s because the same aging flex runs that sag and trap lint also pull apart at joints, creating gaps where blown fiberglass gets drawn in. The camera shows the difference: a clean run has smooth metal walls, not a fuzzy coating of pink and gray sediment. We bag what we remove and show you the volume.
Vent Rerouting
Cleaning can’t fix a run that was wrong from day one. Arlington’s original tract-home builders often routed dryer vents through 140°F attics in lengths that exceed modern code, or terminated them at soffits where lint cakes the underside of the eave and moisture rots the fascia. Rerouting solves this permanently.
We design a new path using solid metal duct where possible, with proper slope for condensation drainage and a roof or gable-end termination with a bird guard. Every reroute gets a written scope, a fixed price, and the same 365-Day Done Right Promise. In homes off Matlock Road or near the Pantego border, we’ve rerouted dozens of runs that were originally exhausted through the garage - a practice that dumps humidity and lint into conditioned space and violates current fire-safety guidance.
Bird Guard Installation & Vent Cap Replacement
Arlington’s Blackland Prairie clay soil shifts seasonally, and that movement pulls vent terminations loose from exterior walls. Birds nest in the gap. Rain enters the run and wicks lint into a paste that blocks airflow completely. We replace damaged caps with Guardsman hardware sized to the duct diameter, and we install bird guards that allow exhaust flow while blocking entry. The fix is photographed, priced in writing, and guaranteed.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Arlington
Our equipment roster includes Rotobrush, Nikro, and Guardsman - brands you can verify independently before we start. We stock common vent caps, bird guards, and solid-metal transition fittings for Arlington’s 4-inch residential runs, so most repairs don’t wait on parts. For homes with Honeywell or Aprilaire whole-house ventilation tied to the laundry area, we coordinate the dryer vent work with those systems so exhaust airflow doesn’t conflict with intake balancing. Everything is named on the invoice, not described as “professional tools.”
Common Dryer Vent Cleaning Problems We See in Arlington Homes
- Original flex duct crushed behind slab-on-grade walls. Arlington’s 1970s ranches often have the dryer pushed against an interior laundry wall with the vent run disappearing into the slab cavity. Decades of thermal cycling make the flex brittle, and a single elbow gets compressed to a thumb-width channel. The dryer runs longer. The heating element overheats. We find this with the camera, then open the wall or reroute through the attic.
- Sagging low points in attic runs trapping lint. Original installers stapled flex duct across joists without proper support straps. In Arlington’s 140°F attics, the material relaxes over years and forms a U-shaped sag where lint accumulates into a dense plug. The visible lint trap stays clean because the blockage is 15 feet away in the attic.
- Clay-shifted terminations letting birds and rain in. The expansive Blackland Prairie soil beneath Arlington’s slabs swells in wet seasons and shrinks in drought, pulling exterior wall penetrations out of square. Vent caps loosen, caulking fails, and starlings or sparrows build nests in the run. We replace the cap, seal the penetration properly, and install a bird guard rated for the exhaust temperature.
- Undersized runs through superheated attics raising fire risk. Arlington’s May-October cooling season means attics stay dangerously hot for months. A long, undersized flex run in that environment doesn’t just dry slowly - the duct material itself degrades faster, and lint trapped near the hot surface is a documented ignition hazard. Rerouting to a shorter, metal path is often the only safe fix.
Pricing for Dryer Vent Cleaning in Arlington, TX
| Service | Typical Range in Arlington |
|---|---|
| Standard dryer vent cleaning (single-family, accessible run) | $149 - $189 |
| Cleaning with bird guard or cap replacement | $189 - $249 |
| Vent rerouting (new path, solid duct, proper termination) | $249 - $389 |
| Camera inspection as standalone service | $89 - $129 |
What moves a job toward the higher end: length of run exceeding 25 feet, multiple elbows, wall or ceiling access needed to reach crushed sections, and coordination with HVAC ductwork in tight Arlington attics. What doesn’t move the price: the neighborhood. We don’t charge more for River Legacy Estates than for south Arlington subdivisions.
Every price is written and agreed before work starts - Haven Standard Clause 1. No per-vent gimmicks, no $79 coupons that balloon to $400 in your driveway. The number on the page is the number on the invoice. Call (817) 520-8797 for a free estimate if your situation doesn’t fit the ranges above.
We Also Serve Cities Near Arlington
Our crews work Arlington regularly and also cover Mansfield, Burleson, Grand Prairie, and Fort Worth. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office. The same written pricing, same documented photo record, same 365-Day Done Right Promise applies in every city we serve.
Serving Arlington, TX - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Dryer Vent Cleaning in Arlington
Because the vent run is blocked, not because the dryer is broken. In Arlington’s 1965-1990 homes, we most often find a sag or crush in the original flex duct that has packed with lint into a thumb-width channel. The heating element cycles on safety limits, clothes stay damp, and energy bills climb. A camera inspection finds the exact location, and a written price fixes it. Call (817) 520-8797 for an exact quote - estimates are free.
Not inside the ductwork itself, but in the same wall or attic chase, yes. Arlington’s slab ranches from that era often cluster the laundry, furnace, and air handler in a central utility core with all penetrations running through the same framed cavity. We’ve found cases where a separated HVAC return draws lint and humidity from a leaking dryer transition box, or where attic insulation debris migrates between systems because both use aging flex duct. The camera inspection shows whether the systems are interacting. If they are, we document it and scope the seal work in writing.
Yes, frequently. Cleaning removes lint; it doesn’t fix a run that exceeds IRC length limits, terminates at a soffit, or routes through a 140°F attic in brittle 1970s flex duct. In Arlington’s older neighborhoods - particularly south of I-30 and along Pioneer Parkway - we reroute several runs per month to shorter, metal paths with proper roof or gable-end terminations. The decision is always documented with photos and priced in writing before we cut a new path.
It affects the termination, which affects the whole run. The expansive clay swells and shrinks seasonally, pulling exterior wall penetrations out of alignment. Caulking fails, vent caps loosen, and the gap becomes an entry point for birds and rain. We see this on homes throughout Arlington, from Interlochen to the Pantego line. We replace damaged caps, reseal with proper exterior-grade materials, and install bird guards that stay secure through soil movement cycles.
Every 12-18 months for a typical household, and every 6-12 months if you run multiple loads weekly or have pets that shed. Arlington’s May-October heat means dryers work harder and longer, and the attic runs that serve them stay in thermal stress for months. The lint that accumulates in a sagging flex duct doesn’t dry out fully during humid spells, so it packs denser and blocks faster than in cooler climates. We note the recommended interval on your written invoice and photo record so you have a documented baseline. Call (817) 520-8797 to schedule - estimates are free.
Written by Tomas Reyes, Owner at CleanRun Duct Repair & Cleaning, serving Arlington since 2013.