Air Duct Cleaning in Arlington - One Price Per System, Agreed Before We Start

Air Duct Cleaning in Arlington, TX

Complete HVAC cleaning in Arlington typically runs $380-$680 for a whole-system job, with air quality and sanitizing services adding $180-$450 depending on whether mold treatment or UV installation is needed. We’re CleanRun, and we dispatch crews to Arlington from our Dallas-Fort Worth office to handle the specific problems this city’s aging housing stock creates: original flex-duct from the 1970s and 1980s that’s now brittle and drawing in attic debris, and slab homes with under-slab duct branches that have collected sediment for decades. Every job starts with a written price before any panel comes off, and every duct run is photographed before and after. Call (817) 520-8797 for a free estimate.

Call (817) 520-8797

Why Arlington Homes Are Different

Arlington’s residential boom between 1965 and 1990 built this city almost entirely in one go, and the result is a housing stock of 35-55 year old tract homes with original duct systems now failing simultaneously. In neighborhoods like Pantego and Dalworthington Gardens, we regularly find fiberglass duct board that has turned to powder at the corners, and flex duct whose plastic liner has hardened and cracked. The Blackland Prairie clay beneath these slab-on-grade ranches shifts with seasonal moisture, pulling apart connections at registers and plenums and creating suction paths that draw fiberglass insulation directly into supply lines.

Arlington’s cooling season runs May through October with weeks above 100°F, pushing AC systems to near-continuous operation. That volume of air movement through already-compromised ductwork accelerates debris accumulation far beyond what moderate climates produce. After spring thunderstorms, humidity spikes find their way into separated joints, creating the moisture differential that triggers mold colonization in attics where duct board has delaminated. In the oldest slabs, particularly those built in the late 1960s and early 1970s, we’ve found supply ducts routed through concrete that connect to dormant under-slab branches holding standing water and sediment from decades of soil movement, a condition rarely seen in newer Mansfield or Keller subdivisions just miles away.

Our Main Arlington Services

Arlington homeowners call us most often for deep system cleaning and documented duct repair. These three services have dedicated Arlington pages with full local detail:

Air Duct Cleaning in Arlington

We clean every duct run with negative-pressure extraction and rotary brushing, photographing the interior before and after so you can verify the work against any competitor’s $79 coupon job. Arlington’s aging flex-duct requires adjusted vacuum pressure to avoid collapsing compromised lines. Air Duct Cleaning in Arlington covers full residential system cleaning with our documented photo record included on every visit.

Dryer Vent Cleaning in Arlington

Lint accumulation in dryer vents is accelerated in Arlington’s long hot season when dryers run more frequently, and the same brittle duct materials found in HVAC systems appear in vent lines. We clean to the exterior termination with rotary tools and airflow verification. Dryer Vent Cleaning in Arlington includes before-and-after documentation and written scope.

Duct Repair & Sealing in Arlington

Joint separation from slab movement and duct board delamination are the two failures we address most in Arlington’s 1970s and 1980s housing stock. We seal with mastic and mechanical fasteners where appropriate, replacing sections only when repair is not viable. Duct Repair & Sealing in Arlington includes written warranty under the 365-Day Done Right Promise.

Before

After

HVAC Cleaning in Arlington

Arlington’s near-continuous cooling season from May through October forces air handlers, evaporator coils, and blowers to operate under sustained load, coating heat-exchange surfaces with a compressed layer of dust, pollen, and biofilm that standard filter changes cannot reach. In homes built during the 1970s and 1980s boom, we frequently find evaporator coils with 3-5 years of accumulated debris restricting airflow by 20% or more, and blower wheels throwing out of balance from uneven loading. HVAC Cleaning addresses these component-level failures with documented before-and-after photography on every visit.

Evaporator Coil Cleaning

Signs you need it

Ice formation on refrigerant lines, weak airflow from registers, or AC running continuously without reaching setpoint in Arlington’s July heat.

What it costs in Arlington

Evaporator coil cleaning typically runs $180-$340 depending on accessibility and contamination level.

How we do it

We remove the coil assembly where possible, apply foaming cleaner, rinse with low-pressure water, and document with photos before reassembly.

Blower Cleaning

Signs you need it

Vibration or noise from the air handler, uneven airflow room-to-room, or visible dust ejected from registers when the system cycles on.

What it costs in Arlington

Blower wheel and motor cleaning typically runs $140-$280 depending on assembly complexity.

How we do it

We remove the blower assembly, clean the wheel vanes and motor housing with compressed air and solvent, balance the wheel, and photograph before reinstalling.

What HVAC Cleaning Costs in Arlington

How do I know my HVAC components are actually dirty?

We photograph every component before touching it, so you see the debris layer yourself before we begin cleaning; after photos are delivered with your job record. Call (817) 520-8797 to schedule an inspection with documentation.

Can HVAC cleaning reduce my summer electric bill in Arlington?

Yes, a clean coil and balanced blower can restore 15-25% of lost airflow efficiency, which matters when your system runs 12-16 hours daily through Arlington’s five-month cooling season. Call (817) 520-8797 for a written estimate.

Air Quality & Sanitizing in Arlington

Arlington’s combination of aging duct infrastructure and extended high-humidity periods creates conditions where mold colonizes inside compromised duct board, and bacterial biofilm establishes on evaporator surfaces that stay wet for months. In homes with under-slab duct branches, we’ve documented anaerobic odors rising from dormant lines that connect to active attic systems. Air Quality & Sanitizing targets these biological contaminants with application-specific treatments, not generic fogging.

Mold Treatment

Signs you need it

Musty odor when AC cycles on, visible growth at registers, or family members with worsening allergy symptoms specific to time spent at home.

What it costs in Arlington

Targeted mold treatment for affected duct runs typically runs $280-$520 depending on linear footage and accessibility.

How we do it

We apply EPA-registered antimicrobial through controlled misting after mechanical removal of visible growth, with post-treatment lab-verifiable sampling available.

UV Light Installation

Signs you need it

Recurring mold after cleaning, chronic evaporator biofilm, or occupied home with immunocompromised residents.

What it costs in Arlington

UV-C lamp installation at the coil or air handler typically runs $340-$580 including lamp and electrical connection.

How we do it

We mount a Honeywell or Aprilaire UV lamp upstream of the coil, wire to the blower circuit for automatic operation, and verify irradiance with a meter.

What Air Quality & Sanitizing Costs in Arlington

Will mold come back after treatment in Arlington’s humidity?

Without addressing the moisture source, yes; we identify and document the entry point, typically a separated duct joint or failed duct board, and include that finding in your written report. Call (817) 520-8797 for inspection with documentation.

Is UV light effective against Arlington’s specific mold strains?

UV-C at 254nm inhibits common Texas indoor molds including Aspergillus and Cladosporium species when properly positioned at the coil surface with adequate dwell time. Call (817) 520-8797 for a written installation scope.

Brands We Service in Arlington

We stock parts and service equipment from Honeywell, Aprilaire, Rotobrush, and Guardsman, with most common filters, UV lamps, and duct repair materials available on our Arlington-area trucks for same-visit completion. our brands page lists full compatibility.

Pricing for Air Duct Cleaning in Arlington, TX

Neighborhoods We Serve in Arlington

We work across Arlington’s full residential footprint, from the original 1960s slabs of West Arlington to the 1980s expansions in South Arlington and the established areas near Pantego and Dalworthington Gardens. Crews are dispatched from our Dallas-Fort Worth office and typically arrive within scheduled windows throughout the Arlington service area.

• Pantego
• Dalworthington Gardens
• West Arlington (1960s-1970s slabs)
• South Arlington (1980s-1990s builds)
• North Arlington (mixed-era subdivisions)

Service Area - Cities Near Arlington

Our crews serve homeowners throughout the Arlington metro vicinity, including Mansfield, TX to the south with its newer subdivisions and different duct challenges, Burleson, TX to the southwest, Grand Prairie, TX to the east with its own 1970s housing stock, and Fort Worth, TX to the west where housing eras and duct types vary significantly by neighborhood.

FAQs About Air Duct Cleaning in Arlington